4. Tiling capabilities
5. Future expansion capabilities for grid mapping to multiple displays
(additional hardware needed)
6. Native to MAC OS
7. The video display software shall be ProVideoPlayer by Renewed
Vision.
e. Custom Cabling, Floor Boxes and Plates
i. Video Patch Plate
1. A video patch plate shall be located in the Booth rack and provide
patch points for all HD-SDI and CATV jacks located on the 12
different wall plates in the auditorium (see AV drawings)
2. The video patch plate shall have four BNC connections wired to the
campus head end video equipment as tie lines for HD-SDI video
3. The video patch plate will have a patch point to an HD-SDI input on
the matrix labeled “To Matrix”.
4. An HDMI output of the matrix shall be converted to an HD-SDI
signal with a Black Magic Designs mini converter. This HD-SDI
signal will feed the “From Matrix” jack on the video patch panel.
5. A campus video feed will be distributed with a Kramer 1x4 RF
distribution amplifier. The outputs of the DA will feed four F
connectors on the panel labeled “Campus TV”
6. A cable TV video feed will be distributed with a Kramer 1x4 RF
distribution amplifier. The outputs of the DA will feed four F
connectors on the panel labeled “Charter Cable”
ii. Wall Video Plates
1. The plate will have two HD-SDI jacks (BNC)
2. The plate will have two CATV jacks (F)
3. The plate will have an intercom jack with A/B switch (3 pin XLR)
4. The plate will have a “Mix” XLR male jack fed from a Kramer
audio distribution amp in the booth rack or Extron MDA-3A
distribution amp in the stage rack.
5. The plate will have a network connection via an Ethercon Cat6
shielded connector.
6. The HD-SDI jacks will be numbered consecutively across all panels
from 1 to 22.
7. The CATV jacks will be numbered consecutively across all panels
from 1 to 22.
iii. Rack Video Plate
1. The plate will have two HD-SDI jacks (BNC)
2. The plate will have two CATV jacks (F)
3. The plate will have an intercom jack with A/B switch (3 pin XLR)
4. The plate will have a “Mix” XLR male jack fed from a Kramer
audio distribution amp in the booth rack or Extron MDA-3A
distribution amp in the stage rack.
5. The plate will have a network connection via an Ethercon Cat6
shielded connector.
(16 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals